# dimfilter¶

dimfilter - Directional filtering of 2-D gridded files in the space (or time) domain

## Synopsis¶

**dimfilter** *input_file.nc* **-D***distance_flag*
**-F****x***width*[*mode*] **-G***output_file.nc*
**-N****x***sectors* [ **-Q***cols* ]
[ **-I***increment* ]
[ **-R***region* ]
[ **-T** ]
[ **-V**[*level*] ]
[ **-f**flags ]

**Note:** No space is allowed between the option flag and the associated arguments.

## Description¶

**dimfilter** will filter a *.nc* file in the space (or time) domain by
dividing the given filter circle into *n_sectors*, applying one of the
selected primary convolution or non-convolution filters to each sector,
and choosing the final outcome according to the selected secondary
filter. It computes distances using Cartesian or Spherical geometries.
The output *.nc* file can optionally be generated as a subregion of the
input and/or with a new **-I**ncrement. In this way, one may have
“extra space” in the input data so that there will be no edge effects
for the output grid. If the filter is low-pass, then the output may be
less frequently sampled than the input. **-Q** is for the error analysis
mode and only requires the total number of columns in the input file,
which contains the filtered depths. Finally, one should know that
**dimfilter** will not produce a smooth output as other spatial filters
do because it returns a minimum median out of *N* medians of *N*
sectors. The output can be rough unless the input data is noise-free.
Thus, an additional filtering (e.g., Gaussian via grdfilter) of the
DiM-filtered data is generally recommended.

## Required Arguments¶

*input_file.nc*- The data grid to be filtered.

**-D***distance_flag*Distance

*flag*tells how grid (x,y) relates to filter*width*, as follows:*flag*= 0: grid (x,y) same units as*width*, Cartesian distances.*flag*= 1: grid (x,y) in degrees,*width*in kilometers, Cartesian distances.*flag*= 2: grid (x,y) in degrees,*width*in km, dx scaled by cos(middle y), Cartesian distances.The above options are fastest because they allow weight matrix to be computed only once. The next three options are slower because they recompute weights for each latitude.

*flag*= 3: grid (x,y) in degrees,*width*in km, dx scaled by cosine(y), Cartesian distance calculation.*flag*= 4: grid (x,y) in degrees,*width*in km, Spherical distance calculation.

**-F****x***width*[*mode*]Sets the primary filter type. Choose among convolution and non-convolution filters. Append the filter code

**x**followed by the full diameter*width*. Available convolution filters are:(

**b**) Boxcar: All weights are equal.(

**c**) Cosine Arch: Weights follow a cosine arch curve.(

**g**) Gaussian: Weights are given by the Gaussian function.Non-convolution filters are:

(

**m**) Median: Returns median value.(

**p**) Maximum likelihood probability (a mode estimator): Return modal value. If more than one mode is found we return their average value. Append - or + to the filter width if you rather want to return the smallest or largest of the modal values.

**-N****x***sectors*Sets the secondary filter type

**x**and the number of bow-tie sectors.*sectors*must be integer and larger than 0. When*sectors*is set to 1, the secondary filter is not effective. Available secondary filters are:(

**l**) Lower: Return the minimum of all filtered values.(

**u**) Upper: Return the maximum of all filtered values.(

**a**) Average: Return the mean of all filtered values.(

**m**) Median: Return the median of all filtered values.(

**p**) Mode: Return the mode of all filtered values.

**-G***output_file.nc**output_file.nc*is the output of the filter.

## Optional Arguments¶

**-I***x_inc*[and optionally*y_inc*] is the output Increment. Append**m**to indicate minutes, or**c**to indicate seconds. If the new*x_inc*,*y_inc*are NOT integer multiples of the old ones (in the input data), filtering will be considerably slower. [Default: Same as input.]

**-R***west*,*east*,*south*, and*north*defines the Region of the output points. [Default: Same as input.]

**-T**- Toggle the node registration for the output grid so as to become the opposite of the input grid [Default gives the same registration as the input grid].

**-Q***cols**cols*is the total number of columns in the input text table file. For this mode, it expects to read depths consisted of several columns. Each column represents a filtered grid with a filter width, which can be obtained by**grd2xyz -Z**. The outcome will be median, MAD, and mean. So, the column with the medians is used to generate the regional component and the column with the MADs is used to conduct the error analysis.

**-V**[*level*] (more ...)- Select verbosity level [c].

**-f**[**i**|**o**]*colinfo*(more ...)- Specify data types of input and/or output columns.

**-^**or just**-**- Print a short message about the syntax of the command, then exits (NOTE: on Windows just use
**-**). **-+**or just**+**- Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exits.
**-?**or no arguments- Print a complete usage (help) message, including the explanation of all options, then exits.

## Grid File Formats¶

By default GMT writes out grid as single precision floats in a COARDS-complaint netCDF file format. However, GMT is able to produce grid files in many other commonly used grid file formats and also facilitates so called “packing” of grids, writing out floating point data as 1- or 2-byte integers. (more ...)

## Geographical And Time Coordinates¶

When the output grid type is netCDF, the coordinates will be labeled
“longitude”, “latitude”, or “time” based on the attributes of the input
data or grid (if any) or on the **-f** or **-R** options. For example,
both **-f0x** **-f1t** and **-R**90w/90e/0t/3t will result in a
longitude/time grid. When the x, y, or z coordinate is time, it will be
stored in the grid as relative time since epoch as specified by
TIME_UNIT and TIME_EPOCH in the
gmt.conf file or on the
command line. In addition, the **unit** attribute of the time variable
will indicate both this unit and epoch.

## Examples¶

Suppose that north_pacific_dbdb5.nc is a file of 5 minute bathymetry from 140E to 260E and 0N to 50N, and you want to find the medians of values within a 300km radius (600km full width) of the output points, which you choose to be from 150E to 250E and 10N to 40N, and you want the output values every 0.5 degree. To prevent the medians from being biased by the sloping plane, you want to divide the filter circle into 6 sectors and to choose the lowest value among 6 medians. Using spherical distance calculations, you need:

gmt dimfilter north_pacific_dbdb5.nc -Gfiltered_pacific.nc -Fm600 -D4 \ -Nl6 -R150/250/10/40 -I0.5 -V

Suppose that cape_verde.nc is a file of 0.5 minute bathymetry from 32W to 15W and 8N to 25N, and you want to remove small-length-scale features in order to define a swell in an area extending from 27.5W to 20.5W and 12.5N to 19.5N, and you want the output value every 2 minute. Using cartesian distance calculations, you need:

gmt dimfilter cape_verde.nc -Gt.nc -Fm220 -Nl8 -D2 -R-27.5/-20.5/12.5/19.5 -I2m -V gmt grdfilter t.nc -Gcape_swell.nc -Fg50 -D2 -V

Suppose that you found a range of filter widths for a given area, and
you filtered the given bathymetric data using the range of filter widths
(e.g., *f100.nc f110.nc f120.nc f130.nc*), and you want to define a
regional trend using the range of filter widths, and you want to obtain
median absolute deviation (MAD) estimates at each data point. Then, you
will need to do:

gmt grd2xyz f100.nc -Z > f100.d gmt grd2xyz f110.nc -Z > f110.d gmt grd2xyz f120.nc -Z > f120.d gmt grd2xyz f130.nc -Z > f130.d paste f100.d f110.d f120.d f130.d > depths.d gmt dimfilter depths.d -Q4 > output.z

## Limitations¶

When working with geographic (lat, lon) grids, all three convolution
filters (boxcar, cosine arch, and gaussian) will properly normalize the
filter weights for the variation in gridbox size with latitude, and
correctly determine which nodes are needed for the convolution when the
filter “circle” crosses a periodic (0-360) boundary or contains a
geographic pole. However, the spatial filters, such as median and mode
filters, do not use weights and thus should only be used on Cartesian
grids (or at very low latitudes) only. If you want to apply such spatial
filters you should project your data to an equal-area projection and run
**dimfilter** on the resulting Cartesian grid.

## Script Template¶

The dim.template.sh is a skeleton shell script that can be used to set up a complete DiM analysis, including the MAD analysis.

## Reference¶

Kim, S.-S., and Wessel, P. (2008), Directional Median Filtering for
Regional-Residual Separation of Bathymetry, *Geochem. Geophys.
Geosyst.*, **9**, Q03005, doi:10.1029/2007GC001850.